@BlokchainB here some stickers #1241786 to personalize the NFC cards for the upcoming StackerNews IRL at TABconf TAKEOVER. I figured out that what you are asking isn't simply some sticker design but something that will provide an identity for your SNIRL idea. So here some quick raw mockup options — in gray to adapt to light/dark web bg, will be black when printing:
Not sure about the slogan, Community Powered Signal, may needs to change or be improved somehow. Consider that printing out stickers usually requires a min quantity, so not sure make sense to have 3 different designs. Check for example vistaprrr for reference. They require a min 25 units of a single design, and the nearest suitable to cover a ID-1 size is 4x4 inches. Not ideal.
A solution could be to print one or more 8x11 inches sheets with the 3 die-cut designs. One holographic sheet would cover 4,5 cards front and back. Two sheets would cover 9 cards, front and back. I've seen @AG making a holographic SN sticker sheet recently, ask her.
If this is the case, I suggest using the previous design from the territories to be printed in the reverse side of each of these 3, the final result could look something like this.