pull down to refresh

0 sats \ 3 replies \ @carter OP 12h \ on: Is this normal for a bitaxe gamma? bitcoin_Mining
a full view of dashboard. it seems like its staying hot longer. might it need new thermal paste or something?
write
preview
this territory is moderated
0 sats \ 2 replies \ @dgdhr335 4h
On first glance I find it pulling 21.5 watts at the settings you specified to be a bit off.
reply
0 sats \ 1 reply \ @carter OP 2h
how would i debug more? should i call the people i bought it from? my other 2 are at 18.49 J/Th and 15.99 J/Th while its still 20.2 J/Th but one is a 602 board
reply
0 sats \ 0 replies \ @dgdhr335 1h
Are you in a particularly warm environment? Ensured the heatsink is seated properly? Otherwise I can't really see why the temps are behaving that way. 5.1V input suggests the power supply is fine. ASIC voltage is correct.
I let mine run for about an hour with the tab left open so it would log a good bit of data. You'll notice the frequency is a lot higher at 600MHz but my power draw is like 10% lower than yours with the commensurate efficiency improvement. You'll also notice the temperature is basically flat with a room temperature of about 25 celsius.
reply