pull down to refresh
0 sats \ 0 replies \ @021da48107 28 Nov 2023 \ on: You Really Can Run Your S19 on 120 Volts at Home! bitcoin
I thought this was cooler then it really is. You basically just take the s19 and break it into 3. So if you want to run the s19 at the same hashrate you will need:
- 3 s19 control boards
- 3 Loki kits from Pivotal Pleb Tech.
- 3 Bitmain APW3++ PSUs
- 3 120v outlets all on different circuits, if you put them all on the same circuit it will trip the 15amp breaker.
- (Optional) An Exhaust Fan if you want the thing to be quieter.
All in all, I think it would probably be cheaper to just pay an electrician to take 2 of those 120v outlets and tie them together and install a 240v outlet. 240v is more efficient as well.
At the end of the day if you have an s19 laying around and you want to throw it in a 110v outlet and are fine with running 1/3 of it then this is for you.
If there is a miner that has similar hashrate to 1/3 of an s19 that runs on 110v that would probably be better than buying an s19 and these adapters to run the s19 on 110v. I did a small amount of research and couldn't find any miners that match those requirements though, comment here if you know of one.