pull down to refresh
20 sats \ 3 replies \ @j7hB75 30 Apr \ parent \ on: Bitaxe Gamma Ice Tower + Fan Orientation bitcoin_Mining
Thank you so much for this! Looks like the Socket adapter for ICE Tower Cooler is the same link for the screws.
I've got my settings at 575 and 1150 and have to keep it really cool with a fan on the back and it stays in the mid-50s. Anymore and it gets into the 60s and I don't like that. I've added pure copper heat sinks at various locations as well.
Oops, sorry about the adapter. Here's the correct link: https://amzn.to/3YkMnQ8
I haven't gotten to adding the pure copper heatsinks yet. In my setup, the biggest impact was replacing the heatsink with the ICE Tower Cooler and the thermal paste. The fan helped with acoustics, but I think at best, it helped marginally with cooling.
If you really want to make it run cool/get into overclocking more, I'd strongly recommend the ICE Tower Cooler + adapter + thermal paste (unless if you already have some laying around). If you have a lot of random small screws, you might be able to get by without needing the screw kit too.
reply
I just had to replace the thermal paste on my ultra, and that fixed overheating issues
reply
It's wild how replacing old stock thermal paste helps.
reply